---

dbus-protocol.h

/* -*- mode: C; c-file-style: "gnu"; indent-tabs-mode: nil; -*- */ /* dbus-protocol.h D-Bus protocol constants * * Copyright (C) 2002, 2003 CodeFactory AB * Copyright (C) 2004, 2005 Red Hat, Inc. * * Licensed under the Academic Free License version 2.1 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA * */ #ifndef DBUS_PROTOCOL_H #define DBUS_PROTOCOL_H /* Don't include anything in here from anywhere else. It's * intended for use by any random library. */ #ifdef __cplusplus extern "C" { #if 0 } /* avoids confusing emacs indentation */ #endif #endif /* Normally docs are in .c files, but there isn't a .c file for this. */ /** * @defgroup DBusProtocol Protocol constants * @ingroup DBus * * @brief Defines constants which are part of the D-Bus protocol * * This header is intended for use by any library, not only libdbus. * * @{ */ /* Message byte order */ #define DBUS_LITTLE_ENDIAN ('l') /**< Code marking LSB-first byte order in the wire protocol. */ #define DBUS_BIG_ENDIAN ('B') /**< Code marking MSB-first byte order in the wire protocol. */ /** Protocol version. */ #define DBUS_MAJOR_PROTOCOL_VERSION 1 /** Type code that is never equal to a legitimate type code */ #define DBUS_TYPE_INVALID ((int) '\0') /** #DBUS_TYPE_INVALID as a string literal instead of a int literal */ #define DBUS_TYPE_INVALID_AS_STRING "\0" /* Primitive types */ /** Type code marking an 8-bit unsigned integer */ #define DBUS_TYPE_BYTE ((int) 'y') /** #DBUS_TYPE_BYTE as a string literal instead of a int literal */ #define DBUS_TYPE_BYTE_AS_STRING "y" /** Type code marking a boolean */ #define DBUS_TYPE_BOOLEAN ((int) 'b') /** #DBUS_TYPE_BOOLEAN as a string literal instead of a int literal */ #define DBUS_TYPE_BOOLEAN_AS_STRING "b" /** Type code marking a 16-bit signed integer */ #define DBUS_TYPE_INT16 ((int) 'n') /** #DBUS_TYPE_INT16 as a string literal instead of a int literal */ #define DBUS_TYPE_INT16_AS_STRING "n" /** Type code marking a 16-bit unsigned integer */ #define DBUS_TYPE_UINT16 ((int) 'q') /** #DBUS_TYPE_UINT16 as a string literal instead of a int literal */ #define DBUS_TYPE_UINT16_AS_STRING "q" /** Type code marking a 32-bit signed integer */ #define DBUS_TYPE_INT32 ((int) 'i') /** #DBUS_TYPE_INT32 as a string literal instead of a int literal */ #define DBUS_TYPE_INT32_AS_STRING "i" /** Type code marking a 32-bit unsigned integer */ #define DBUS_TYPE_UINT32 ((int) 'u') /** #DBUS_TYPE_UINT32 as a string literal instead of a int literal */ #define DBUS_TYPE_UINT32_AS_STRING "u" /** Type code marking a 64-bit signed integer */ #define DBUS_TYPE_INT64 ((int) 'x') /** #DBUS_TYPE_INT64 as a string literal instead of a int literal */ #define DBUS_TYPE_INT64_AS_STRING "x" /** Type code marking a 64-bit unsigned integer */ #define DBUS_TYPE_UINT64 ((int) 't') /** #DBUS_TYPE_UINT64 as a string literal instead of a int literal */ #define DBUS_TYPE_UINT64_AS_STRING "t" /** Type code marking an 8-byte double in IEEE 754 format */ #define DBUS_TYPE_DOUBLE ((int) 'd') /** #DBUS_TYPE_DOUBLE as a string literal instead of a int literal */ #define DBUS_TYPE_DOUBLE_AS_STRING "d" /** Type code marking a UTF-8 encoded, nul-terminated Unicode string */ #define DBUS_TYPE_STRING ((int) 's') /** #DBUS_TYPE_STRING as a string literal instead of a int literal */ #define DBUS_TYPE_STRING_AS_STRING "s" /** Type code marking a D-Bus object path */ #define DBUS_TYPE_OBJECT_PATH ((int) 'o') /** #DBUS_TYPE_OBJECT_PATH as a string literal instead of a int literal */ #define DBUS_TYPE_OBJECT_PATH_AS_STRING "o" /** Type code marking a D-Bus type signature */ #define DBUS_TYPE_SIGNATURE ((int) 'g') /** #DBUS_TYPE_SIGNATURE as a string literal instead of a int literal */ #define DBUS_TYPE_SIGNATURE_AS_STRING "g" /** Type code marking a unix file descriptor */ #define DBUS_TYPE_UNIX_FD ((int) 'h') /** #DBUS_TYPE_UNIX_FD as a string literal instead of a int literal */ #define DBUS_TYPE_UNIX_FD_AS_STRING "h" /* Compound types */ /** Type code marking a D-Bus array type */ #define DBUS_TYPE_ARRAY ((int) 'a') /** #DBUS_TYPE_ARRAY as a string literal instead of a int literal */ #define DBUS_TYPE_ARRAY_AS_STRING "a" /** Type code marking a D-Bus variant type */ #define DBUS_TYPE_VARIANT ((int) 'v') /** #DBUS_TYPE_VARIANT as a string literal instead of a int literal */ #define DBUS_TYPE_VARIANT_AS_STRING "v" /** STRUCT and DICT_ENTRY are sort of special since their codes can't * appear in a type string, instead * DBUS_STRUCT_BEGIN_CHAR/DBUS_DICT_ENTRY_BEGIN_CHAR have to appear */ /** Type code used to represent a struct; however, this type code does not appear * in type signatures, instead #DBUS_STRUCT_BEGIN_CHAR and #DBUS_STRUCT_END_CHAR will * appear in a signature. */ #define DBUS_TYPE_STRUCT ((int) 'r') /** #DBUS_TYPE_STRUCT as a string literal instead of a int literal */ #define DBUS_TYPE_STRUCT_AS_STRING "r" /** Type code used to represent a dict entry; however, this type code does not appear * in type signatures, instead #DBUS_DICT_ENTRY_BEGIN_CHAR and #DBUS_DICT_ENTRY_END_CHAR will * appear in a signature. */ #define DBUS_TYPE_DICT_ENTRY ((int) 'e') /** #DBUS_TYPE_DICT_ENTRY as a string literal instead of a int literal */ #define DBUS_TYPE_DICT_ENTRY_AS_STRING "e" /** Does not include #DBUS_TYPE_INVALID, #DBUS_STRUCT_BEGIN_CHAR, #DBUS_STRUCT_END_CHAR, * #DBUS_DICT_ENTRY_BEGIN_CHAR, or #DBUS_DICT_ENTRY_END_CHAR - i.e. it is the number of * valid types, not the number of distinct characters that may appear in a type signature. */ #define DBUS_NUMBER_OF_TYPES (16) /* characters other than typecodes that appear in type signatures */ /** Code marking the start of a struct type in a type signature */ #define DBUS_STRUCT_BEGIN_CHAR ((int) '(') /** #DBUS_STRUCT_BEGIN_CHAR as a string literal instead of a int literal */ #define DBUS_STRUCT_BEGIN_CHAR_AS_STRING "(" /** Code marking the end of a struct type in a type signature */ #define DBUS_STRUCT_END_CHAR ((int) ')') /** #DBUS_STRUCT_END_CHAR a string literal instead of a int literal */ #define DBUS_STRUCT_END_CHAR_AS_STRING ")" /** Code marking the start of a dict entry type in a type signature */ #define DBUS_DICT_ENTRY_BEGIN_CHAR ((int) '{') /** #DBUS_DICT_ENTRY_BEGIN_CHAR as a string literal instead of a int literal */ #define DBUS_DICT_ENTRY_BEGIN_CHAR_AS_STRING "{" /** Code marking the end of a dict entry type in a type signature */ #define DBUS_DICT_ENTRY_END_CHAR ((int) '}') /** #DBUS_DICT_ENTRY_END_CHAR as a string literal instead of a int literal */ #define DBUS_DICT_ENTRY_END_CHAR_AS_STRING "}" /** Max length in bytes of a bus name, interface, or member (not object * path, paths are unlimited). This is limited because lots of stuff * is O(n) in this number, plus it would be obnoxious to type in a * paragraph-long method name so most likely something like that would * be an exploit. */ #define DBUS_MAXIMUM_NAME_LENGTH 255 /** This one is 255 so it fits in a byte */ #define DBUS_MAXIMUM_SIGNATURE_LENGTH 255 /** Max length of a match rule string; to keep people from hosing the * daemon with some huge rule */ #define DBUS_MAXIMUM_MATCH_RULE_LENGTH 1024 /** Max arg number you can match on in a match rule, e.g. * arg0='hello' is OK, arg3489720987='hello' is not */ #define DBUS_MAXIMUM_MATCH_RULE_ARG_NUMBER 63 /** Max length of a marshaled array in bytes (64M, 2^26) We use signed * int for lengths so must be INT_MAX or less. We need something a * bit smaller than INT_MAX because the array is inside a message with * header info, etc. so an INT_MAX array wouldn't allow the message * overhead. The 64M number is an attempt at a larger number than * we'd reasonably ever use, but small enough that your bus would chew * through it fairly quickly without locking up forever. If you have * data that's likely to be larger than this, you should probably be * sending it in multiple incremental messages anyhow. */ #define DBUS_MAXIMUM_ARRAY_LENGTH (67108864) /** Number of bits you need in an unsigned to store the max array size */ #define DBUS_MAXIMUM_ARRAY_LENGTH_BITS 26 /** The maximum total message size including header and body; similar * rationale to max array size. */ #define DBUS_MAXIMUM_MESSAGE_LENGTH (DBUS_MAXIMUM_ARRAY_LENGTH * 2) /** Number of bits you need in an unsigned to store the max message size */ #define DBUS_MAXIMUM_MESSAGE_LENGTH_BITS 27 /** The maximum total number of unix fds in a message. Similar * rationale as DBUS_MAXIMUM_MESSAGE_LENGTH. However we divide by four * given that one fd is an int and hence at least 32 bits. */ #define DBUS_MAXIMUM_MESSAGE_UNIX_FDS (DBUS_MAXIMUM_MESSAGE_LENGTH/4) /** Number of bits you need in an unsigned to store the max message unix fds */ #define DBUS_MAXIMUM_MESSAGE_UNIX_FDS_BITS (DBUS_MAXIMUM_MESSAGE_LENGTH_BITS-2) /** Depth of recursion in the type tree. This is automatically limited * to DBUS_MAXIMUM_SIGNATURE_LENGTH since you could only have an array * of array of array of ... that fit in the max signature. But that's * probably a bit too large. */ #define DBUS_MAXIMUM_TYPE_RECURSION_DEPTH 32 /* Types of message */ /** This value is never a valid message type, see dbus_message_get_type() */ #define DBUS_MESSAGE_TYPE_INVALID 0 /** Message type of a method call message, see dbus_message_get_type() */ #define DBUS_MESSAGE_TYPE_METHOD_CALL 1 /** Message type of a method return message, see dbus_message_get_type() */ #define DBUS_MESSAGE_TYPE_METHOD_RETURN 2 /** Message type of an error reply message, see dbus_message_get_type() */ #define DBUS_MESSAGE_TYPE_ERROR 3 /** Message type of a signal message, see dbus_message_get_type() */ #define DBUS_MESSAGE_TYPE_SIGNAL 4 #define DBUS_NUM_MESSAGE_TYPES 5 /* Header flags */ /** If set, this flag means that the sender of a message does not care about getting * a reply, so the recipient need not send one. See dbus_message_set_no_reply(). */ #define DBUS_HEADER_FLAG_NO_REPLY_EXPECTED 0x1 /** * If set, this flag means that even if the message bus knows how to start an owner for * the destination bus name (see dbus_message_set_destination()), it should not * do so. If this flag is not set, the bus may launch a program to process the * message. */ #define DBUS_HEADER_FLAG_NO_AUTO_START 0x2 /** * If set on a method call, this flag means that the caller is prepared to * wait for interactive authorization. */ #define DBUS_HEADER_FLAG_ALLOW_INTERACTIVE_AUTHORIZATION 0x4 /* Header fields */ /** Not equal to any valid header field code */ #define DBUS_HEADER_FIELD_INVALID 0 /** Header field code for the path - the path is the object emitting a signal or the object receiving a method call. * See dbus_message_set_path(). */ #define DBUS_HEADER_FIELD_PATH 1 /** Header field code for the interface containing a member (method or signal). * See dbus_message_set_interface(). */ #define DBUS_HEADER_FIELD_INTERFACE 2 /** Header field code for a member (method or signal). See dbus_message_set_member(). */ #define DBUS_HEADER_FIELD_MEMBER 3 /** Header field code for an error name (found in #DBUS_MESSAGE_TYPE_ERROR messages). * See dbus_message_set_error_name(). */ #define DBUS_HEADER_FIELD_ERROR_NAME 4 /** Header field code for a reply serial, used to match a #DBUS_MESSAGE_TYPE_METHOD_RETURN message with the * message that it's a reply to. See dbus_message_set_reply_serial(). */ #define DBUS_HEADER_FIELD_REPLY_SERIAL 5 /** * Header field code for the destination bus name of a message. See dbus_message_set_destination(). */ #define DBUS_HEADER_FIELD_DESTINATION 6 /** * Header field code for the sender of a message; usually initialized by the message bus. * See dbus_message_set_sender(). */ #define DBUS_HEADER_FIELD_SENDER 7 /** * Header field code for the type signature of a message. */ #define DBUS_HEADER_FIELD_SIGNATURE 8 /** * Header field code for the number of unix file descriptors associated * with this message. */ #define DBUS_HEADER_FIELD_UNIX_FDS 9 /** * Header field code for the container instance that sent this message. */ #define DBUS_HEADER_FIELD_CONTAINER_INSTANCE 10 /** * Value of the highest-numbered header field code, can be used to determine * the size of an array indexed by header field code. Remember though * that unknown codes must be ignored, so check for that before * indexing the array. */ #define DBUS_HEADER_FIELD_LAST DBUS_HEADER_FIELD_CONTAINER_INSTANCE /** Header format is defined as a signature: * byte byte order * byte message type ID * byte flags * byte protocol version * uint32 body length * uint32 serial * array of struct (byte,variant) (field name, value) * * The length of the header can be computed as the * fixed size of the initial data, plus the length of * the array at the end, plus padding to an 8-boundary. */ #define DBUS_HEADER_SIGNATURE \ DBUS_TYPE_BYTE_AS_STRING \ DBUS_TYPE_BYTE_AS_STRING \ DBUS_TYPE_BYTE_AS_STRING \ DBUS_TYPE_BYTE_AS_STRING \ DBUS_TYPE_UINT32_AS_STRING \ DBUS_TYPE_UINT32_AS_STRING \ DBUS_TYPE_ARRAY_AS_STRING \ DBUS_STRUCT_BEGIN_CHAR_AS_STRING \ DBUS_TYPE_BYTE_AS_STRING \ DBUS_TYPE_VARIANT_AS_STRING \ DBUS_STRUCT_END_CHAR_AS_STRING /** * The smallest header size that can occur. (It won't be valid due to * missing required header fields.) This is 4 bytes, two uint32, an * array length. This isn't any kind of resource limit, just the * necessary/logical outcome of the header signature. */ #define DBUS_MINIMUM_HEADER_SIZE 16 /* Errors */ /* WARNING these get autoconverted to an enum in dbus-glib.h. Thus, * if you change the order it breaks the ABI. Keep them in order. * Also, don't change the formatting since that will break the sed * script. */ /** A generic error; "something went wrong" - see the error message for more. */ #define DBUS_ERROR_FAILED "org.freedesktop.DBus.Error.Failed" /** There was not enough memory to complete an operation. */ #define DBUS_ERROR_NO_MEMORY "org.freedesktop.DBus.Error.NoMemory" /** The bus doesn't know how to launch a service to supply the bus name you wanted. */ #define DBUS_ERROR_SERVICE_UNKNOWN "org.freedesktop.DBus.Error.ServiceUnknown" /** The bus name you referenced doesn't exist (i.e. no application owns it). */ #define DBUS_ERROR_NAME_HAS_NO_OWNER "org.freedesktop.DBus.Error.NameHasNoOwner" /** No reply to a message expecting one, usually means a timeout occurred. */ #define DBUS_ERROR_NO_REPLY "org.freedesktop.DBus.Error.NoReply" /** Something went wrong reading or writing to a socket, for example. */ #define DBUS_ERROR_IO_ERROR "org.freedesktop.DBus.Error.IOError" /** A D-Bus bus address was malformed. */ #define DBUS_ERROR_BAD_ADDRESS "org.freedesktop.DBus.Error.BadAddress" /** Requested operation isn't supported (like ENOSYS on UNIX). */ #define DBUS_ERROR_NOT_SUPPORTED "org.freedesktop.DBus.Error.NotSupported" /** Some limited resource is exhausted. */ #define DBUS_ERROR_LIMITS_EXCEEDED "org.freedesktop.DBus.Error.LimitsExceeded" /** Security restrictions don't allow doing what you're trying to do. */ #define DBUS_ERROR_ACCESS_DENIED "org.freedesktop.DBus.Error.AccessDenied" /** Authentication didn't work. */ #define DBUS_ERROR_AUTH_FAILED "org.freedesktop.DBus.Error.AuthFailed" /** Unable to connect to server (probably caused by ECONNREFUSED on a socket). */ #define DBUS_ERROR_NO_SERVER "org.freedesktop.DBus.Error.NoServer" /** Certain timeout errors, possibly ETIMEDOUT on a socket. * Note that #DBUS_ERROR_NO_REPLY is used for message reply timeouts. * @warning this is confusingly-named given that #DBUS_ERROR_TIMED_OUT also exists. We can't fix * it for compatibility reasons so just be careful. */ #define DBUS_ERROR_TIMEOUT "org.freedesktop.DBus.Error.Timeout" /** No network access (probably ENETUNREACH on a socket). */ #define DBUS_ERROR_NO_NETWORK "org.freedesktop.DBus.Error.NoNetwork" /** Can't bind a socket since its address is in use (i.e. EADDRINUSE). */ #define DBUS_ERROR_ADDRESS_IN_USE "org.freedesktop.DBus.Error.AddressInUse" /** The connection is disconnected and you're trying to use it. */ #define DBUS_ERROR_DISCONNECTED "org.freedesktop.DBus.Error.Disconnected" /** Invalid arguments passed to a method call. */ #define DBUS_ERROR_INVALID_ARGS "org.freedesktop.DBus.Error.InvalidArgs" /** Missing file. */ #define DBUS_ERROR_FILE_NOT_FOUND "org.freedesktop.DBus.Error.FileNotFound" /** Existing file and the operation you're using does not silently overwrite. */ #define DBUS_ERROR_FILE_EXISTS "org.freedesktop.DBus.Error.FileExists" /** Method name you invoked isn't known by the object you invoked it on. */ #define DBUS_ERROR_UNKNOWN_METHOD "org.freedesktop.DBus.Error.UnknownMethod" /** Object you invoked a method on isn't known. */ #define DBUS_ERROR_UNKNOWN_OBJECT "org.freedesktop.DBus.Error.UnknownObject" /** Interface you invoked a method on isn't known by the object. */ #define DBUS_ERROR_UNKNOWN_INTERFACE "org.freedesktop.DBus.Error.UnknownInterface" /** Property you tried to access isn't known by the object. */ #define DBUS_ERROR_UNKNOWN_PROPERTY "org.freedesktop.DBus.Error.UnknownProperty" /** Property you tried to set is read-only. */ #define DBUS_ERROR_PROPERTY_READ_ONLY "org.freedesktop.DBus.Error.PropertyReadOnly" /** Certain timeout errors, e.g. while starting a service. * @warning this is confusingly-named given that #DBUS_ERROR_TIMEOUT also exists. We can't fix * it for compatibility reasons so just be careful. */ #define DBUS_ERROR_TIMED_OUT "org.freedesktop.DBus.Error.TimedOut" /** Tried to remove or modify a match rule that didn't exist. */ #define DBUS_ERROR_MATCH_RULE_NOT_FOUND "org.freedesktop.DBus.Error.MatchRuleNotFound" /** The match rule isn't syntactically valid. */ #define DBUS_ERROR_MATCH_RULE_INVALID "org.freedesktop.DBus.Error.MatchRuleInvalid" /** While starting a new process, the exec() call failed. */ #define DBUS_ERROR_SPAWN_EXEC_FAILED "org.freedesktop.DBus.Error.Spawn.ExecFailed" /** While starting a new process, the fork() call failed. */ #define DBUS_ERROR_SPAWN_FORK_FAILED "org.freedesktop.DBus.Error.Spawn.ForkFailed" /** While starting a new process, the child exited with a status code. */ #define DBUS_ERROR_SPAWN_CHILD_EXITED "org.freedesktop.DBus.Error.Spawn.ChildExited" /** While starting a new process, the child exited on a signal. */ #define DBUS_ERROR_SPAWN_CHILD_SIGNALED "org.freedesktop.DBus.Error.Spawn.ChildSignaled" /** While starting a new process, something went wrong. */ #define DBUS_ERROR_SPAWN_FAILED "org.freedesktop.DBus.Error.Spawn.Failed" /** We failed to setup the environment correctly. */ #define DBUS_ERROR_SPAWN_SETUP_FAILED "org.freedesktop.DBus.Error.Spawn.FailedToSetup" /** We failed to setup the config parser correctly. */ #define DBUS_ERROR_SPAWN_CONFIG_INVALID "org.freedesktop.DBus.Error.Spawn.ConfigInvalid" /** Bus name was not valid. */ #define DBUS_ERROR_SPAWN_SERVICE_INVALID "org.freedesktop.DBus.Error.Spawn.ServiceNotValid" /** Service file not found in system-services directory. */ #define DBUS_ERROR_SPAWN_SERVICE_NOT_FOUND "org.freedesktop.DBus.Error.Spawn.ServiceNotFound" /** Permissions are incorrect on the setuid helper. */ #define DBUS_ERROR_SPAWN_PERMISSIONS_INVALID "org.freedesktop.DBus.Error.Spawn.PermissionsInvalid" /** Service file invalid (Name, User or Exec missing). */ #define DBUS_ERROR_SPAWN_FILE_INVALID "org.freedesktop.DBus.Error.Spawn.FileInvalid" /** There was not enough memory to complete the operation. */ #define DBUS_ERROR_SPAWN_NO_MEMORY "org.freedesktop.DBus.Error.Spawn.NoMemory" /** Tried to get a UNIX process ID and it wasn't available. */ #define DBUS_ERROR_UNIX_PROCESS_ID_UNKNOWN "org.freedesktop.DBus.Error.UnixProcessIdUnknown" /** A type signature is not valid. */ #define DBUS_ERROR_INVALID_SIGNATURE "org.freedesktop.DBus.Error.InvalidSignature" /** A file contains invalid syntax or is otherwise broken. */ #define DBUS_ERROR_INVALID_FILE_CONTENT "org.freedesktop.DBus.Error.InvalidFileContent" /** Asked for SELinux security context and it wasn't available. */ #define DBUS_ERROR_SELINUX_SECURITY_CONTEXT_UNKNOWN "org.freedesktop.DBus.Error.SELinuxSecurityContextUnknown" /** Asked for AppArmor security context and it wasn't available. */ #define DBUS_ERROR_APPARMOR_SECURITY_CONTEXT_UNKNOWN "org.freedesktop.DBus.Error.AppArmorSecurityContextUnknown" /** Asked for ADT audit data and it wasn't available. */ #define DBUS_ERROR_ADT_AUDIT_DATA_UNKNOWN "org.freedesktop.DBus.Error.AdtAuditDataUnknown" /** There's already an object with the requested object path. */ #define DBUS_ERROR_OBJECT_PATH_IN_USE "org.freedesktop.DBus.Error.ObjectPathInUse" /** The message meta data does not match the payload. e.g. expected number of file descriptors were not sent over the socket this message was received on. */ #define DBUS_ERROR_INCONSISTENT_MESSAGE "org.freedesktop.DBus.Error.InconsistentMessage" /** The message is not allowed without performing interactive authorization, * but could have succeeded if an interactive authorization step was * allowed. */ #define DBUS_ERROR_INTERACTIVE_AUTHORIZATION_REQUIRED "org.freedesktop.DBus.Error.InteractiveAuthorizationRequired" /** The connection is not from a container, or the specified container instance * does not exist. */ #define DBUS_ERROR_NOT_CONTAINER "org.freedesktop.DBus.Error.NotContainer" /* XML introspection format */ /** XML namespace of the introspection format version 1.0 */ #define DBUS_INTROSPECT_1_0_XML_NAMESPACE "http://www.freedesktop.org/standards/dbus" /** XML public identifier of the introspection format version 1.0 */ #define DBUS_INTROSPECT_1_0_XML_PUBLIC_IDENTIFIER "-//freedesktop//DTD D-BUS Object Introspection 1.0//EN" /** XML system identifier of the introspection format version 1.0 */ #define DBUS_INTROSPECT_1_0_XML_SYSTEM_IDENTIFIER "http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd" /** XML document type declaration of the introspection format version 1.0 */ #define DBUS_INTROSPECT_1_0_XML_DOCTYPE_DECL_NODE "<!DOCTYPE node PUBLIC \"" DBUS_INTROSPECT_1_0_XML_PUBLIC_IDENTIFIER "\"\n\"" DBUS_INTROSPECT_1_0_XML_SYSTEM_IDENTIFIER "\">\n" /** @} */ #ifdef __cplusplus #if 0 { /* avoids confusing emacs indentation */ #endif } #endif #endif /* DBUS_PROTOCOL_H */

---

docroot: /var/www/469ed2f6-4d4b-4a8a-9f5e-ee4ef04d3bc8/public_html

---

curdir: /usr/include/dbus-1.0/dbus

	.		4096
	..		4096
X	dbus-address.h		2809
X	dbus-bus.h		3470
X	dbus-connection.h		27018
X	dbus-errors.h		2909
X	dbus-macros.h		7246
X	dbus-memory.h		1961
X	dbus-message.h		15259
X	dbus-misc.h		1810
X	dbus-pending-call.h		3809
X	dbus-protocol.h		24139
X	dbus-server.h		5412
X	dbus-shared.h		5392
X	dbus-signature.h		3047
X	dbus-syntax.h		2359
X	dbus-threads.h		8505
X	dbus-types.h		4143
X	dbus.h		3961