pktgen_sample03_burst_single_flow.sh

#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
#
# Script for max single flow performance
#  - If correctly tuned[1], single CPU 10G wirespeed small pkts is possible[2]
#
# Using pktgen "burst" option (use -b $N)
#  - To boost max performance
#  - Avail since: kernel v3.18
#   * commit 38b2cf2982dc73 ("net: pktgen: packet bursting via skb->xmit_more")
#  - This avoids writing the HW tailptr on every driver xmit
#  - The performance boost is impressive, see commit and blog [2]
#
# Notice: On purpose generates a single (UDP) flow towards target,
#   reason behind this is to only overload/activate a single CPU on
#   target host.  And no randomness for pktgen also makes it faster.
#
# Tuning see:
#  [1] http://netoptimizer.blogspot.dk/2014/06/pktgen-for-network-overload-testing.html
#  [2] http://netoptimizer.blogspot.dk/2014/10/unlocked-10gbps-tx-wirespeed-smallest.html
#
basedir=`dirname $0`
source ${basedir}/functions.sh
root_check_run_with_sudo "$@"

# Parameter parsing via include
source ${basedir}/parameters.sh

# Trap EXIT first
trap_exit

# Set some default params, if they didn't get set
if [ -z "$DEST_IP" ]; then
    [ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1"
fi
[ -z "$DST_MAC" ]   && DST_MAC="90:e2:ba:ff:ff:ff"
[ -z "$BURST" ]     && BURST=32
[ -z "$CLONE_SKB" ] && CLONE_SKB="0" # No need for clones when bursting
[ -z "$COUNT" ]     && COUNT="0" # Zero means indefinitely
if [ -n "$DEST_IP" ]; then
    validate_addr${IP6} $DEST_IP
    read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP)
fi
if [ -n "$DST_PORT" ]; then
    read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
    validate_ports $UDP_DST_MIN $UDP_DST_MAX
fi

# General cleanup everything since last run
[ -z "$APPEND" ] && pg_ctrl "reset"

# Threads are specified with parameter -t value in $THREADS
for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
    dev=${DEV}@${thread}

# Add remove all other devices and add_device $dev to thread
    [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
    pg_thread $thread "add_device" $dev

# Base config
    pg_set $dev "flag QUEUE_MAP_CPU"
    pg_set $dev "count $COUNT"
    pg_set $dev "clone_skb $CLONE_SKB"
    pg_set $dev "pkt_size $PKT_SIZE"
    pg_set $dev "delay $DELAY"
    pg_set $dev "flag NO_TIMESTAMP"

# Destination
    pg_set $dev "dst_mac $DST_MAC"
    pg_set $dev "dst${IP6}_min $DST_MIN"
    pg_set $dev "dst${IP6}_max $DST_MAX"

if [ -n "$DST_PORT" ]; then
	# Single destination port or random port range
	pg_set $dev "flag UDPDST_RND"
	pg_set $dev "udp_dst_min $UDP_DST_MIN"
	pg_set $dev "udp_dst_max $UDP_DST_MAX"
    fi

[ ! -z "$UDP_CSUM" ] && pg_set $dev "flag UDPCSUM"

# Setup burst, for easy testing -b 0 disable bursting
    # (internally in pktgen default and minimum burst=1)
    if [[ ${BURST} -ne 0 ]]; then
	pg_set $dev "burst $BURST"
    else
	info "$dev: Not using burst"
    fi
done

# Run if user hits control-c
function print_result() {
    # Print results
    for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
	dev=${DEV}@${thread}
	echo "Device: $dev"
	cat /proc/net/pktgen/$dev | grep -A2 "Result:"
    done
}
# trap keyboard interrupt (Ctrl-C)
trap true SIGINT

if [ -z "$APPEND" ]; then
    echo "Running... ctrl^C to stop" >&2
    pg_ctrl "start"

print_result
else
    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
fi

docroot: /var/www/469ed2f6-4d4b-4a8a-9f5e-ee4ef04d3bc8/public_html

curdir: /usr/src/linux-headers-6.8.0-117/samples/pktgen

	.	4096
	..	4096
X	functions.sh	8871
X	parameters.sh	3767
X	pktgen_bench_xmit_mode_netif_receive.sh	3420
X	pktgen_bench_xmit_mode_queue_xmit.sh	2593
X	pktgen_sample01_simple.sh	2848
X	pktgen_sample02_multiqueue.sh	3174
X	pktgen_sample03_burst_single_flow.sh	3412
X	pktgen_sample04_many_flows.sh	3448
X	pktgen_sample05_flow_per_thread.sh	3126
X	pktgen_sample06_numa_awared_queue_irq_affinity.sh	4010